Do you have a question?
Ground bond tester P 6600H
P 6600H
- Modern desktop device
- Ground bond test AC: 1 - 32 A / 0 - 6 Ω
- Resistance measurement: 1 Ω - 1 MΩ
- Continuity test: < 14 Ω ≙ short circuit i > 100 kΩ ≙ no continuity
- 4-wire measurement technology
- Fully electronic power source
- Complies with all current standards (IEC, UL, EN, VDE etc.)
- Wide-range power supply unit: 90 - 250 V, 50 Hz / 60 Hz
The P 6600H tester is equipped with a country-specific socket on the front panel for connecting the DUT. This socket enables a direct connection to the DUT. In contrast, the P 6600U tester has banana sockets and high-voltage sockets on the front panel. These sockets allow the connection of specific test adapters. Both devices are specially designed for carrying out ground bond tests.
Accessoires
- Max. Operating voltage / DC voltage: 1,500 VDC
- Test voltage / connection - start switch: 1,500 VDC
- Test voltage / contour - connection: 1,500 VDC
- With high-current plug ST 04-i
- With start button
- Connection cable 2 m long
- Max. Operating voltage / DC voltage: 1,500 VDC
- Test voltage / connection - start switch: 1,500 VDC
- Test voltage / contour - connection: 1,500 VDC
- With 4 mm banana plug
- Without start button
- Connection cable 2 m long
- Kelvin clamp for connection to the DUT
- Max. Operating voltage / DC voltage: 1,500 VDC
- Test voltage / connection - start switch: 1,500 VDC
- Test voltage / contour - connection: 1,500 VDC
- With high-current plug ST 04-i
- Connection cable 2 m long
- Kelvin clamp for connection to the DUT
- Max. Operating voltage / DC voltage: 1,500 VDC
- Test voltage / connection - start switch: 1,500 VDC
- Test voltage / contour - connection: 1,500 VDC
- With 4 mm banana plug
- Connection cable 2 m long
- Crocodile clip for connection to the DUT
- Max. Operating voltage / DC voltage: 1,500 VDC
- Test voltage / connection - start switch: 1,500 VDC
- Test voltage / contour - connection: 1,500 VDC
- With high-current plug ST 04-i
- Connection cable 2 m long
- Crocodile clip for connection to the DUT
- Max. Operating voltage / DC voltage: 1,500 VDC
- Test voltage / connection - start switch: 1,500 VDC
- Test voltage / contour connection: 1,500 VDC
- With 4 mm banana plug
- Connection cable 2 m long
- With crocodile clip for connection to the DUT
- With two 4 mm banana plugs
- Connection cable 2 m long
- For devices: P 6600H, P 6600U
